Rapidly developing in the northeast of Adana, Sarıçam stands out with its new housing areas, public housing settlements and important highway links. Its proximity to the Tarsus-Adana-Gaziantep motorway means many drivers here do long-distance, high-speed driving daily. This usage profile creates its own load for auto AC systems. At Temel Servis we provide AC gas refill, compressor-condenser care, leak detection and odor removal to all vehicles in Sarıçam.
In a car travelling at high speed on the motorway, the condenser gets plenty of airflow, which is a good thing. But in Adana's heat, an AC running non-stop for a long time keeps the compressor engaged for long periods. In the daily routine where city and motorway driving mix, the system constantly changes revs, which calls for balanced wear of the parts. Also, in developing Sarıçam construction and road works are common; dust from these areas builds up in the condenser and filter. For long-distance drivers, checking the AC before a trip reduces the risk of being stranded in the heat.
Depending on your car's age and model, R134a or new-generation R1234yf gas is used. In a system working over long distances, even a small gas shortfall is felt as a marked weakening of cooling in the heat. When refilling we fully evacuate the existing gas with a vacuum, test the system, and charge the amount the manufacturer specifies in grams together with compressor oil using a precision-scale device. The wrong type or too much/too little gas both spoils cooling and shortens compressor life, which is why we never skip the pre-refill check.
In AC units that run for long periods, the compressor clutch and bearings are the parts that tire most. Because the AC can stay on for hours on motorway drives, a noise from the compressor or fluctuating cooling is the first warning sign. The condenser is exposed to stones, insects and construction dust at high speed; its fins both clog and can be crushed. Cleaning the fins improves cooling; if there is a dent or hole, renewal may be needed. With manometer and thermometer readings we see the real state of both parts and do not recommend a part if it is not needed. For a general pre-trip check of your car you can look at our Adana periodic maintenance page.
In Sarıçam's environment of construction and road dust, the pollen filter fills quickly. When the filter clogs, airflow drops, more dust enters the cabin, and moisture on the evaporator prepares the ground for odor-causing microorganisms. A musty smell from the AC usually appears for this reason. We renew the pollen filter and apply disinfectant to the evaporator to clean the odor source. For drivers who travel long stretches with windows closed and the AC on, clean cabin air matters for both comfort and concentration.
If the AC stops cooling again shortly, there is a leak in the system. Motorway vibration can loosen union connections and o-rings over time. By introducing UV dye or nitrogen pressure we find the leak and solve the seepage permanently rather than just adding gas. Having the AC's leak and cooling checked before a long trip in the heat safeguards travel comfort. To see which service suits you, you can review our Adana service guide and for general maintenance our Adana auto service pages.
Our workshop is in Seyhan's Fevzipaşa neighbourhood and is easily reachable from Sarıçam. Although we are Opel and Chevrolet specialists, we provide AC service for all makes. We know the needs of long-distance vehicles and do the work based on measurement and transparency. For our service in the neighbouring district you can look at our Yüreğir auto AC service page. For an appointment call 0533 662 01 00. Address: Fevzipaşa Mah. 48057. Sk. No:16/A, 01355 Seyhan/Adana.
Yes, especially in the summer months. Weakening or losing the AC on a long trip in the heat spoils both comfort and concentration. A pre-trip leak and cooling check reduces this risk.
Cooling is usually better at high speed because the condenser gets more airflow. But if the system is unhealthy it cools weakly regardless of speed; the real determinant is the state of the system.
A metallic noise or vibration when the AC runs is often caused by the compressor clutch or a bearing. An early check can prevent a bigger fault; do not ignore this noise.
It does not harm the gas directly, but it clogs the condenser and pollen filter and weakens cooling. In developing areas it helps to have the filter and condenser cleaned more often.
Our workshop is in Seyhan Fevzipaşa and is a short trip from Sarıçam. By booking an appointment you can have the work done without waiting.